Among these TIs, Bi2Se3 is a particularly interesting compound due to its relatively learn more large bulk band gap and a simple surface state consisting of a single Dirac cone-like structure [26, 27]. Study of the dielectric function reveals that the optical dielectric constant of Bi2Se3
can be very different for the trigonal and orthorhombic phases in the NIR regime [28]. Bi2Se3 exhibits a number of means through which their dielectric properties can be altered [28–33]. Herein, structural phase transition between trigonal and orthorhombic states, which is achieved by a high pressure and temperature, is proposed and studied as a means to change the intrinsic effective dielectric properties of the MDM-MMs [28]. Here, we numerically demonstrate a blueshift tunable nanometer-scale MM consisting of an elliptical Wnt inhibitor nanohole array (ENA) embedded in the MDM multilayers where the dielectric core layer is a Bi2Se3 composite. Under a high pressure of 2 to 4.3 Pa at 500°C, Bi2Se3 occurring in trigonal phase undergoes a transition to orthorhombic phase and features a large change
this website in the values of the effective dielectric constant [28]. Accordingly, a massive blueshift of the resonant response (from 2,140 to 1,770 nm) of a Bi2Se3-based MDM-ENA is achieved in the NIR region. Our proposed blueshift tunable negative-index MM provides greater flexibility in the practical Casein kinase 1 application and has a potential of enabling efficient switches and modulators in the NIR region. Methods The proposed MDM-ENA suspended in a vacuum is shown in Figure 1, with the coordinate axes and the polarization configuration of the normally incident light. The structure consists of trilayers of Au/Bi2Se3/Au. The thickness of each Au layer is 30 nm, and the thickness of the Bi2Se3 layer is 60 nm. The metamaterial parameters
are optimized for the maximum sensitivity of the resonance to a change in the refractive index of the Bi2Se3 core dielectric layer in the NIR spectral range. The element resonator is shown in Figure 1b, where the pitch of the elliptical holes is L = 400 nm, the diameters of the elliptical holes are d 1 = 240 nm and d 2 = 120 nm, and β is a cross-sectional plane of the structure. The z-axis is normal to the structure surface, and the x-y plane is parallel to the structure surface. This simulated structure is periodically extended along the x and y axes. The tunable optical properties of the structure are calculated using 3D EM Explorer Studio [34], a commercial finite difference time domain (FDTD) code. In the simulation, a simple Drude-type model for Au permittivity was used, which is a good approximation to experimental values in the NIR region.