Kern R, Sastrawan R, Ferber J, Stangl R, Luther J: Modeling and interpretation of electrical impedance spectra of dye solar cells operated under open-circuit conditions. Electrochim Acta 2002, 47:4213. 10.1016/S0013-4686(02)00444-9CrossRef Competing interests The authors declare that they have no competing interests. Authors’ contributions XC and HH proposed the idea and presided over the study. XL, MG, JC, and YT conceived and designed the experiment. XL and JL wrote the paper. All authors read and approved the final manuscript.”
“Background Antireflection coatings (ARCs) have important roles in a wide range of industrial applications

such as solar cells, buildings, smartphone Autophagy inhibitor cost displays and camera lenses. Current ARC technology, which based on destructive interference mechanism, usually requires costly vacuum deposition techniques such as sputtering or chemical vapour deposition. Opaganib Recently, subwavelength nanostructures, such as nanowires, nanospheres and nanorods, resulting in a graded refractive index, emerged

as ideal optical structures for ARC application. Among these, silica spheres with controllable diameter ranging from 50 nm to 2 µm prepared by Stober method have been the most studied [1–5]. Silica nanospheres could be used as etching mask [6, 7] to create graded refractive index nanowire/nanodome structures, or nanospheres themselves could be used as antireflection coatings directly [8, 9]. Optimized

refractive index of single AR film was given by the equation , where n a and n s are the refractive index of the air and the substrate, respectively. Commercial borosilicate glass substrate typically has a refractive index approximately 1.51, which means that a material with a refractive index approximately 1.23 is required in order to get the AR effect between air and glass. Given the fact that no material with such low refractive index has been discovered, most researchers have adopted mesoporous or hollow silica spheres to get the desired low refractive index [4, 10, 11]. Few Enzalutamide attention were paid to the solid silica nanospheres. It is questionable whether thin films composing solid silica spheres, in particular for monolayer of silica nanospheres, could lead to remarkable AR effects. Several methods have been employed to deposit nanosphere films on various substrates, including continuous assembly [12], convective assembly [5, 13], layer by layer method (LbL) [3, 4], printing [14] and Langmuir-Blodgett method [15, 16]. Among them, Langmuir-Blodgett (LB) method is the most convenient and effective approach for controllable deposition of ordered nanospheres. It has been commonly used to make two-dimensional (2D) and three-dimensional (3D) photonic crystal structures. Bardosova et al. reviewed the monolayer and multilayer deposition of silica spheres by LB method [17].